NéoChauffe – Mono Kit Automatic
1 bar with 3 propellers for radiators 40 to 70 cm wide.
Not sure which kit? Our guide answers in 1 minuteSee how NéoChauffe improves heat distribution
See how easy it is to install our fans under your radiator and enjoy better circulation of warm air in your home.
Your questions
Which radiators is this kit suitable for?
For hot-water panel radiators and finned convectors. Choose the kit according to the width: Mono from 40 to 70 cm, Duo from 70 to 120 cm, Trio from 120 to 180 cm. Towel rails and some designer or electric radiators are not always suitable: if in doubt, write to us.
When do the fans switch on and off?
Automatically: the sensor starts them when the radiator reaches about 30 °C and stops them when it cools down to about 25 °C (within 5 °C, according to our manufacturer).
Is it noisy?
No: our manufacturer states an average noise level of 18 dB, very quiet operation.
Do they use a lot of electricity?
No: each bar uses 1 W at 5 V, and only while the radiator is heating.
Specifications
- Radiator width
- 40 to 70 cm
- Fan bars
- 1 (3 propellers)
- Sensor
- Automatic (no settings)
- Start / stop
- Automatic, based on radiator temperature
- Mounting
- Magnets or feet included
- Power supply
- Power adapter included
- Suitable for
- Hot-water panel radiators and finned convectors
- Heat pump compatible
- Yes
- Guarantee
- 2-year legal
- Dimensions of one bar
- 30 × 6.9 × 3 cm
- Power consumption
- 1 W per bar
- Power adapter
- 5 V, 1 A
- Maximum airflow
- 51 m³/h per bar (manufacturer data)
- Average noise level
- 18 dB (manufacturer data)
- Activation
- Starts at about 30 °C, stops at about 25 °C (± 5 °C)
- Connecting cable
- 50 cm between two bars
- Material
- Flame-retardant plastic, white
- Standards
- CE, RoHS, REACH, ErP (according to the manufacturer)
Description
A compact fan bar fitted with 3 propellers that sits under your radiator and pushes warm air into the room. Heat spreads better through the room: you may feel comfortable with the thermostat set a little lower.
Automatic sensor
The bar switches on when the radiator heats up and switches off when it cools down. There's nothing to adjust.
How it works
Installed in no time
The magnets hold the kit under the radiator; for a finned convector, it stands on its feet. Plug in the adapter: it’s ready, without tools or drilling.
- Place
- Plug in
- Enjoy
Automatic operation
The fans start when the radiator heats up and stop when it cools down. There’s nothing to adjust.
All about how it works →What’s in the box
- 1Fan bar (3 propellers)
- 1Sensor
- 1Power adapter
- Mounting magnets
- Mounting feet
- Instructions
